Maintenance and Care Strategies for Your Smok Pen Starter Kit
The Smok Pen is podsmall really a new type of pen that allows you to write on paper that is heated before you write. It is the kind of device that some students would want to have, as it eliminates the necessity for them to carry a whole tube of special writing ink. You merely fill the reservoir with the normal ink and place your pen in the unit and then write on any smooth surface that you would like.
The Smok pen consists of two major components: the pen body, that is of course where you possess it in place, and the Smok Valve which serve as the connector for the USB charging port. Both parts are encased in a metal and plastic tube known as the Smok Valve, that is opened via a valve control found at the bottom of the pen. One end of the tube leads to the cigarette lighter socket as the other results in the USB charging port. On the front side of the Smok Valve you will find a dome with a lip that holds the heating element.
When the pen is charged, it is heated up by the USB power port and begins to create heat. This heat melts the glue which holds the Smok Valve together, causing it to expand until it leaks out onto the paper or anything you are writing on. After the ink is successfully charged, the Smok Valve automatically closes, leaving you with a fully functional pen. The exterior of the pen includes a transparent dome with a lip around it. Both edges of the dome have a metallic texture to them, which when heated causes the ink to spread right into a fine powder that may easily be sucked into the writing medium.
When you first take out your Smok Pen, you will notice that it looks exactly like any other pen. It has a fine point that wont smudge or bleed if you are writing on paper. It also has a beautiful metallic shine to it, gives the device a futuristic look. However, this will not mean that the device cannot be used in an ordinary manner, as there are a variety of different ways where you can still benefit from the great features of the pen.
One way is to heat the machine using your hand, which is how most people enjoy their pens. If you are using the device in this fashion, you need to make certain you do not touch the heating coil heads directly. Instead, you need to warm the entire pen to bring out their warmth. It is very important remove the battery prior to this step, as some manufacturers specify a particular temperature to activate the coil heads. There are various e-liquids in the marketplace that can help you achieve this heat change quickly and easily, ensuring that you never run into issues while warming the pen.
You might find that after heating up the device that it generally does not work correctly. This normally implies that you’re either holding the pen incorrectly, are pressing the heating coil too much, or are holding these devices at a position which is not conducive to warming. If this is the case, then you will need to remove the batteries and put these devices back together again. It is strongly recommended that you do this each time you start enjoying your Smok Pen starter kit – if you wish to keep carefully the device for longer than this then you can certainly simply repeat the process and soon you have everything sorted.
When testing your starter kit to make sure that everything is working correctly, you will need to check out the connections to the tank and the coil head. Ideally, the connections on the tank should be securely tightened – if they are loose then they ought to be tightened to the manufacturer’s specifications. If you feel that this is not done correctly, then it may be worthwhile getting the entire tank re-tightened by a professional as many devices like these are manufactured to a very high standard. If this is not the case, then your only way to ensure that everything is working properly is to have the entire tank re-tied.
The next step in the battery care process would be to charge your show pen. This can usually be done through the USB port of your computer. Once charged, the device should be ready for use. When you have completed this step, you should leave the device plugged into a power supply. You should check regularly that all the coils are charged up, and you should leave these devices to charge for the recommended time frame – typically around 5 hours.